FS LASER

Whether you are setting up you laser experiment or integrating a commercial product, we have competitively high performance components for your needs. If you did not find what you have been searching for, do not hesitate to contact us.

  • Femtosecond Yb Oscillators

    FLINT

    Features
    • Sub‑40 fs without any additional pulse compressor
    • 250 nJ pulse energy
    • 20 W output power
    • 76 MHz is standard
    • No amplified spontaneous emission
    • Rugged, industrial-grade mechanical design
    • Automated second harmonic generator
    • Optional CEP stabilization
    • Possibility to lock to external clock
OVERVIEW

The FLINT oscillator is based on Yb crystal pumped by a high brightness laser diode module. Generation of femtosecond pulses is provided by Kerr lens mode-locking. Once started, mode-locking remains stable over a long period of time and is immune to minor mechanical impact. Piezo-actuator can be implemented in customized oscillators in order to control the cavity length. FLINT oscillator can also be equipped with a Carrier Envelope Phase (CEP) stabilization system. Locking of the optical pulse to an external signal Pharos oscillator can be equipped with piezo actuators for precise control of the cavity length. Carrier Envelope Phase (CEP) stabilization Pharos oscillator can be equipped with nonlinear interfero­meter and feedback loop throughout the pump current of the laser diode bar for CEP stabilization.

  • SPECIFICATIONS
  • PERFORMANCE
  • APPLICATIONS
  • DRAWINGS
  • OPTIONS
  • DOWNLOADS
SPECIFICATIONS
OUTPUT CHARACTERISTICS
OUTPUT CHARACTERISTICS
PRODUCT NAME FL1-02 FL1-08 FL1-SP FL2-12 FL2-20 FL2-SP
Max. average power 2 W 8 W up to 2 W > 12 W > 20 W up to 2 W
Pulse duration (assuming Gaussian pulse shape) < 100 fs < 120 fs 30 ... 50 fs 1) < 120 fs < 170 fs 30 ... 50 fs 1)
Pulse energy > 25 nJ > 100 nJ up to 25 nJ > 150 nJ > 250 nJ up to 25 nJ
Centre wavelength 1035 2) ± 10 nm 1030 ± 3 nm 1040 ± 10 nm 1029 ± 3 nm 1026 ± 2 nm 1040 ± 10 nm
Repetition rate ~ 76 MHz 3) ~ 76 MHz 4) ~ 76 MHz ~ 76 MHz 4)
Output pulse-to-pulse stability < 0.5 % rms over 24 hours 5)
Polarization Linear, horizontal
Beam pointing stability < 10 µrad/°C
Beam quality TEM00; M2 < 1.2
Optional 2H section n/a Yes, conversion efficiency > 30 %
Internal attenuator n/a Yes

1)Depends on output power ~600 mW <40 fs; up to 2 W <50 fs.

2)Choice of a particular central wavelength with ±1 nm tolerance is available upon request.

3)Other repetition rates are available in the range from 60 to 100 MHz.

4)Other repetition rates are available in the range from 70 to 80 MHz.

5)With enabled power-lock, under stable environment.

DIMENSIONS
PRODUCT NAME FL1-02 FL1-08 FL1-SP FL2-12 FL2-20 FL2-SP
Laser head 430 (L) × 195 (W) × 114 (H) mm 542 (L) × 322 (W) × 146 (H) mm
Power supply and chiller rack 642 (L) × 533 (W) × 540 (H) mm 642 (L) × 533 (W) × 673 (H) mm
Chiller Included. Different options are available
ENVIRONMENTAL & UTILITY REQUIREMENTS
PRODUCT NAME FL1-02 FL1-08 FL1-SP FL2-12 FL2-20 FL2-SP
Room temperature 15 – 30 ºC (air conditioning recommended)
Relative humidity < 80 % (non condensing)
Electric 110 VAC, 50 – 60 Hz, 2 A  or  220 VAC, 50 – 60 Hz, 1 A
APPLICATIONS
  • Seeding Yb/Nd based ultrashort pulse laser amplifiers
  • THz generation
  • Two‑photon polymerization
  • Non‑linear microscopy
  • Seeding CEP stabilized laser sources
  • Pumping of femtosecond OPA
OPTIONS
AUTOMATED SECOND HARMONICS GENERATORS

FEATURES

  • 517 nm
  • Output selection by software
  • Integrated into the system
  • Rugged, industrial grade mechanical design

OUTPUT CHARACTERISTICS

PRODUCT NAME FLINT
FL2‑02‑2H
FLINT
FL2‑08‑2H
FLINT
FL2‑12‑2H
FLINT
FL2‑20‑2H
FLINT
FL2‑SP
Max. average power (~1035 nm) > 2 W > 8 W > 12 W > 20 W > 2 W
Max. average power (~517 nm) > 0.6 W > 2.4 W > 3.6 W > 6 W > 0.6 W
Pulse energy (~1035 nm) 1) > 25 nJ > 100 nJ > 150 nJ > 250 nJ > 25 nJ
Pulse energy (~517 nm) 1) > 7.5 nJ > 30 nJ > 45 nJ > 75 nJ > 7.5 nJ
Pulse duration
(assuming Gaussian pulse shape)
< 100 fs < 120 fs < 120 fs < 170 fs < 100 fs 2)
Repetition rate ~ 76 MHz 3) ~ 76 MHz ~ 76 MHz 4)
Centre wavelength 517.5 ± 5 nm 5) 515 ± 1.5 nm 514.5 ± 1.5 nm 513 ± 1 nm 520 ± 10 nm
Output pulse stability < 0.5 % rms over 24 hours 6)
Polarization (~1035 nm) Linear, horizontal
Polarization (~517 nm) Linear, horizontal
Beam pointing stability < 10 µrad/ºC
Beam quality TEM00, M2 < 1.2

1)Depends on output power ~600 mW <40 fs; up to 2 W <50 fs.

2)Typical value.

3)Other repetition rates are available in the range from 60 to 100 MHz.

4)Other repetition rates are available in the range from 70 to 80 MHz.

5)Choice of a particular central wavelength with ±1 nm tolerance is available upon request.

6)With enabled power-lock, under stable environment.

CEP STABILIZATION

MORE INFORMATION

Contact Light Conversion for detailed performance datasheet.

REPETITION RATE STABILIZATION

MORE INFORMATION

Contact Light Conversion for detailed performance datasheet.

DOWNLOADS
FLINT Femtosecond Yb Oscillators
Product datasheet
Version 14/01/2020
0.33 MB
Ultrafast Lasers & Systems for Science, 2020.
Product catalogue
Version 14/01/2020
13.91 MB
超快激光 2019.
Products catalogue in Chinese
Version 22/05/2019
11.3 MB